Archive for the ‘Train Sim World’ Category


TSW logo

Today we’ve made our fourth test build update for Train Sim World (Build #55) available for you to test. As we have for the previous test builds, please try this through the weekend, and if positive we’ll apply the patch to the main game early next week. We’d like to give a big thank you to all of you who have consistently and constructively offered your feedback and encouragement over the last few weeks.

Here are the items addressed in Build #55:

New Features
  • You are now able to change the opacity of the center ‘reticle’ dot using CTRL + 5 (0%, 50%, 100%).
Optimisation
  • This build contains a number of general optimisation improvements.
  • Optimised concurrency settings to engine audio.
  • Optimised concurrency of audio tracks being played because of running sounds.
Load/Save Issues
  • Fixed an issue where a red stop signal refuses to change on save and reload.
  • Fixed an issue where restarting a scenario after save and reload causes signal priority to fail.
  • Fixed an issue that would cause the distance walked and driven to be reset on save and reload.
  • Fixed an issue where objectives would disappear on save-reload while in Service Mode.
  • Fixed an issue where saving a game while in the turntable cabin might result in player going through the roof on reload.
  • Fixed an issue that would cause the Dispatcher Core to fail on reloading a saved game.
  • Fixed an issue that would cause the player to be moved to inappropriate areas when saving near to the rear of a train consist whilst moving forward.
  • Fixed an issue that would render the turntable unusable when saving a game.
  • Fixed an issue where saving while in the turntable cabin causes player to spawn outside when reloading.
  • Fixed an issue where the character position changes on reload using the turntable.
  • Fixed an issue when saving and reloading, the refuelling hose and other objects disappear completely.
  • Fixed an issue where reloading while refuelling causes the hose to revert back to its stand.
  • Fixed an issue where the state of the CutOut switch is not correctly reinstated when loading from a save game.
Rail Vehicles
  • Several general improvements to the braking System.
  • Fixed the chain animation on the SD40-2 so that it now animates in sync with the brake cylinder.
  • The End of Train Device now flashes correctly.
  • Fixed the issue that prevented the AC4400CW from being shut down using the emergency cut-off switch.
Gameplay
  • Adjusted speed limits on two troublesome signals at Sand Patch Summit to resolve a number of speed limit related issues in scenarios.
  • The Center dot ‘reticle’ no longer reverts when using the map.
  • Addressed the final objectives in Cumberland Charge to improve the flow of the scenario.
  • Fixed the broken consist in Ice and Snow.
  • The Voice Over should now pause when the game is paused.
Audio
  • Track joint audio has been improved with additional mixing/filtering as per customer feedback.
  • Dynamic Brake audio has been improved with additional mixing/filtering as per customer feedback.
  • Compressor Pressure Relief Valve audio added to the AC4400CW as per customer feedback.
  • Fixed the road vehicle audio that would continue consuming system resources despite being out of range.
Known Issues
  • There may still be some Save/Load Issues present. We are continuing our work in this area and would greatly appreciate additional feedback from you on this.
  • There may still be some issues present with vehicle airbrake systems.

The Train Sim World update is available for you to test on Steam. To subscribe to the Update 4 Test Build, follow these instructions:

Subscribing to Test Builds
  1. Load Steam and navigate to your Game Library.
  2. Right-click on Train Sim World: CSX Heavy Haul and select Properties.
  3. Select the Betas Tab and from the drop-down box, select u4tb from the list.
  4. Click Close and Steam will automatically begin to download the update.

It’s important that you share your feedback with us, you can do this below on the Steam forums or by submitting tickets to our Support Team.

The Train Sim World Update 4 Test Build will be approximately 465 MB in size


TSW logo

Today we have made our third update (Build #52) for Train Sim World available to everyone. There is no need to subscribe to a test build as this will update the default installation. If you’re currently subscribed to a test build, you’ll be automatically deferred to the main build. We’d like to give a big thank you to all of you who have consistently and constructively offered your feedback and encouragement.

Here are the items addressed in Build #52:

Load/Save Issues

 

  • Further work has been done on identifying entities not correctly persisting and restoring state.
  • Identified and fixed the cause of some voice overs occasionally not playing on restore.
Optimisations
  • This build contains the first of our multi-threading improvements. In this build, SimuGraph® will use as many CPU cores as are available, to concurrently evaluate SimuGraph processing on all rail vehicles. This reduces the FPS impact when you sit in a locomotive, and should deliver a greater benefit if more cores are available. We are continuing work in this area.
  • Improvement to non-player train physics performance.
  • Other optimisation improvements, particularly when interacting with the AC4400CW IFDs.
  • Reviewed and corrected lighting setup on rail vehicles.
  • Changed foliage MiP handling to improve the distant view and deliver a performance improvement.

Keyboard Support

  • We have added support for a wide array of International Keyboards.

Rail Vehicles

  • General improvements to the brake pipes.
  • Corrected the Ditch light functionality on the AC4400CW and SD40-2.

Gameplay

  • Fixed an issue that would cause you to Crash to Desktop while attempting to tab a signal in Cumberland Charge. Additional guidance on this scenario is listed under Known Issues.
  • Fixed an issue that would cause you to Crash to Desktop when loading the last save point in Helping Hand.
  • Fixed an issue that would prevent you from completing the Fully Fuelled scenario.

Audio

  • Missing coupling audio added.
  • Engine audio improvements.
  • Horn audio improvements.
  • Improvements to the Cab Occlusion system .

Known Issues

  • At the end of the Cumberland Charge scenario, extra vigilance should be paid to ensure your train is following the light blue line indicated on the 2D Map, as your enter Cumberland Yard. This may require more switches than those indicated, to be changed in order to reach the correct destination.
  • There are still some instances where Saved sessions fail to initialise properly on reloading. We are working to resolve all remaining instances. We would advise you avoid using the Save/Load feature for the time-being.

The Train Sim World update will download automatically on Steam. If you are not receiving this update, please double-check that Steam has correctly unsubscribed you from test builds:

Unsubscribing from Test Builds

  1. Load Steam and navigate to your Game Library.
  2. Right-click on Train Sim World: CSX Heavy Haul and select Properties.
  3. Select the Betas Tab and from the drop-down box, select None – Opt out of all beta programs from the list.
  4. Click Close and allow Steam to update.
  5. If Steam fails to update, please select Exit from the Steam menu and then relaunch Steam. If you still do not receive the update, please submit a ticket to our Support Team[dovetailgames.kayako.com].

The Train Sim World Update 3 (Build #52) will be approximately 253 MB in size.


7a49585ad8797dad2909f284b8cb16461dce4736

Train Sim World: CSX Heavy Haul, arriving March 16th on Steam for Windows PC, now available to pre-order!
The time to get on-board Train Sim World: CSX Heavy Haul has arrived! Today we open the doors for you to pre-order, click here to get your ticket to be the first to play when it goes live on March 16th.

Train Sim World: CSX Heavy Haul is priced at £24.99 / 34.99€ / $39.99 and if you choose to pre-order, you’ll receive a 10% discount. If you own any of the following versions of Train Simulator, you’ll receive an additional bonus discount of 10% off, saving you a total of 20% off the full price:

.

Collections

  • Dovetail Games Franchise Collection

Train Simulator 2017

  • TS2017: Standard Edition
  • TS2017: Pioneers Edition
  • TS2017: Boxed Retail
  • TS2017: UK First Class Edition
  • TS2017: German First Class Edition
  • TS2017: US First Class Edition
  • TS2017: Premium Edition

Train Simulator 2016

  • TS2016: Boxed Retail
  • TS2016: Steam Edition
  • TS2016: Digital Codes
  • TS2016: Standard Edition
  • TS2016: UK First Class Edition
  • TS2016: German First Class Edition
  • TS2016: US First Class Edition
  • TS2016: Epic Journeys
  • TS2016: Steam Mega Edition

Train Simulator 2015

  • TS2015: Standard Edition
  • TS2015: Steam Edition
  • TS2015: Boxed Retail
  • TS2015: Summer Edition

Train Simulator 2014

  • TS2014: Standard Edition
  • TS2014: Steam Edition
  • TS2014: Boxed Retail

Train Simulator 2013

  • TS2013: Standard Edition
  • TS2013: Deluxe Edition
  • TS2013: UK Boxed Retail
  • TS2013: German Boxed Retail
  • TS2013: USA Boxed Retail

Railworks 3: Train Simulator 2012

  • Railworks 3: TS2012
  • Railworks 3: TS2012: Deluxe Edition
  • Railworks 3: TS2012: Boxed Retail
  • Railworks 3: Haulin’ USA
  • Railworks 2

Railworks 2

  • Railworks 2 UK Boxed Retail
  • Railworks 2 German Boxed Retail
  • Railworks 2 US Boxed Retail

Railworks

  • Railworks UK Boxed Retail
  • Railworks German Boxed Retail
  • Railworks US Boxed Retail

STEAM